PHARMA GRANULATION EQUIPMENTS
Multi Mill
- Precisely designed to grind / compress/impact and shear in an effective manner
- Most suitable for Granulating, Pulverizing, Mixing, Shredding and Kneading of a range of wet & dry material
- Facilitates automation capability and dust-free product transfer, helps in reducing cross-contamination, Provided with a butterfly valve
- Higher output with process uniformity
- Available in batch size ranging from 50 kg to 500 kgs
- Available in standard cGMP & Customised models with SS 304 / 316 / 316L contact parts
Vibro Sifter
- Available in standard cGMP and customized models with SS 304/316/316L contact parts
- Effective in the separation of mass composition of solids, liquids from solids and also gradation of material as per particle size
- Double and triple deck unit with different screens can be provided
- Available sizes 12” 18” 24” 30” 36” 48” 72”
- Noiseless and maintenance free unit
Paste Kettle
- Available in standard cGMP and customized models with SS 304/316/316L contact parts
- Serves an effective purpose in heating of Paste, Pulp, Juice of fruits & Vegetables to the desired temperature
- Hemispherical design for proper mixing of paste
- Discharge from bottom via butterfly valve
- driven via motor & gearbox assembly mounted on top
- Anchor type impeller design for proper mixing of material
- Hydraulic lifting with tilting arrangement
- Steam and electrical heating option available
- Available in batch size ranging from 50kg to 1000kg
Rapid Mixer Granulator
- Available in standard cGMP and customized models with SS 304/316/316L contact parts
- High-quality precession machine suitable for efficient and uniform mixing of raw material in the same container.
- Less wetting and more rapid drying
- Mix the dry component first, followed by wet Granulation, without transferring the dry mixture
- PLC operated system with basic manual controls (Optional)
- Available in batch capacity ranging from 0.5 kg to 1000 kg.
Fluid Bed Dryer
- Single piece design ensuring effective drying of material
- Available in standard cGMP and customized models with SS 304 / 316 / 316L contact parts.
- Superior over conventional methods of drying moist products
- The product to be dried is fluidized by passing jets of hot gases through it, ensuring uniform transfer of heat energy from the gas stream to the moisture laden product, achieving uniform drying.
- Highly customizable with optional packages suiting varied requirement of clients
- PLC HMI operated system with basic manual controls
- Available in batch size ranging from 5 kg to 500 kg
Cage Blender
- Mainly used for blending of dry powders for tablet and capsule Production, facilitating better flow for tablets and capsules.
- Dust-free operation and adaptable to handle more than one container.
- Available in standard cGMP and customized models with SS 304/316/3 l 6L contact parts
- Equipped with advanced control systems.
- Available in batch size ranging from 50 kg to 1500 kg. customizable as per client requirement
Coating Pan
- Extensively used for sugar and film coating of tablets, pallets and granules.
- Comprises of ellipsoidal shaped pan fabricated out of SS plate, mounted on gearbox shaft, driven by electric motor.
- The complete drive unit is enclosed in a sturdy unit
- Heaters are interlocked for blower motor concerning safety.
- Available in standard cGMP and customized models with SS 304 / 3l6 / 3l6L contact parts.
- Available model 12” 18” 24” 30” 36” 48” 60” & 72”.
Automatic Tablet Coater
- Available in standard cGMP and customized models with SS 304 / 3l6 / 3l6L contact parts.
- Efficient aqueous organic solvent based film coating as well as sugar coating for tablets, pallets, granules.
- Automated process technique for coating as coating fluids are sprayed / dosed on the product by means of a state of the art of Spray Gun and seeds.
- Complete automation modern PLC HMI based operating syste
- AHU with pre, final and HEPA filter.
- Peristaltic pump to control material dosage in spray guns
- Solution holding tank with pneumatic stirrer
- CIP system for washing
- Available model 12” 18” 24” 36” 48” 60” & 72”.
IPC Bin
- The IPC Bins loaders are used for the transfer of materials in a dust free manner without human touch in pharmaceutical industries for load powder into RMG bowls etc.
- Available in standard cGMP and customized models with SS 304 / 3l6 / 3l6L contact parts.
- Minimizes the overall amount of handling of materials that occurs in manufacturing and other such processes.
- Facilitates automation capability and dust free product transfer. Helps to control containment and cross contamination. Provided with butterfly valve for discharge.
- Available in different capacities ranging
- from 25 Litres to l ,500 Litres.
Vacuum Transfer System
- Available in standard cGMP and customized models with SS 304 / 3l6 / 3l6L contact parts.
- Capable of vacuum conveying of upto 2,700 kg/hr of material at distances upto 300 ft.
- Ideal for long distance conveying and where product degradation is a concern.
- Assure dust free operation since the product is conveyed under vacuum.
- Designed to meet sanitary standards and provides hygienic transfer of materials.
- VTS represent a more intelligent method of cleaning and removing materials from large tanks.
- Available in all ranges suiting client's requirements
Tipper
- Hydraulically operated with an arm to lift and tilt / rotate FBD bowl by 180°.
- Easy to clamp with FBD bowl.
- Easy to operate and clean.
- Eliminates tedious and unhygienic manual handling of products.
- Operation is completely dust free and eliminates scooping.
- Can be provided with pneumatic actuator.
- Can be integrated to downstream / upstream units.
- Swivelling movement of the lifting arm is facilitated.
- cGMP compliant with manual operations.
- Lift height 1,000 mm to 4,000 mm.
- Available in lifting capacities ranging from 50 Kgs to 500 Kgs.
Mechanical Loader
- Ideal for loading materials into sifter,
- RMG, tablet compressors etc.
- Hydraulic/electromechanical lifting arrangement.
- Can be integrated to downstream / upstream units.
- Swivelling movement of the lifting arm is facilitated.
- cGMP compliant with manual operations.
- Lift height 1,000 mm to 4,000 mm.
- Available in lifting capacities ranging from 50 Kgs to 1 ,000 Kgs.